The Ember Travel Mug²'s hidden-till-lit display is an LED-lit display that will let you know what your Ember is doing. Here is some information you may see on your mug while in use.
Tap Display Interactions:
- Tap the Ember Logo 1x to see the current temperature of the liquid in the Ember. If no liquid is present, the Ember will display EMPTY or COLD
- Tap the Ember Logo 2x to see temperature slider (press + or - to raise/lower the set temperature)
- Tap the Ember Logo 3x to see mug's name. This can be customized in the settings section of the Ember App
- Tap the Ember Logo 4x to see the Ember's current battery level
HELLO: Hello will display when pressing the power button once to power on the mug
GOODBYE: Goodbye will display when powering off the mug. To power off the mug, press and hold the power button for 2 seconds
PAIR: Pair will display by pressing and holding the power button for 5 seconds (additional information on pairing the Ember can be found in Travel Mug²: How to Pair)
RESET: Press and hold the power button for 7 seconds to reset the Ember
SYNC: Sync will display when performing a firmware update. Firmware updates become available periodically in the settings section of the Ember App
EMPTY: Empty will display when the Ember is currently empty or if the it is unable to detect the temperature of the liquid. The heat sensors recognize a drastic temperature change to know liquid is present, so we always recommend pouring in liquid that is hotter than your set temperature
COLD: Heaters are turned off in this mode