The Ember Travel mug display is an LED-lit display that will let you know what your Ember is doing. Below are the various displays that may be seen during normal use of the mug.
Tap Display Interactions:
- Tap the Ember Logo 1x to see the current temperature of the liquid in the Ember. If no liquid is present, the Ember will display EMPTY or COLD
- Tap the Ember Logo 2x to see mug's name. This can be customized in the settings section of the Ember App
- Tap the Ember Logo 3x to see the Ember's current battery level
EMBER: Displayed as the default name seen when double tapping the touch logo (a custom name can be set through the Ember App)
HELLO: Displayed when the Ember Mug is powering ON. To power on the Ember, press and hold the Ember Logo for 2-3 seconds until HELLO is displayed.
EMPTY: Displayed when the thermal sensors are not recognizing a change in temperature present in the inner vessel. This notification may also show if liquid is not present or the temperature rapidly decreases (caused by adding cold creamer).
COLD: Liquid in the mug is cold. Heaters are turned off in this mode
OFF?: Displayed when a user presses or holds the touch logo for 3-4 seconds, awaiting confirmation to power OFF. To confirm powering OFF the Ember, tap the touch logo while "OFF?" to confirm powering OFF the mug.
GOOD BYE: Displayed while the Ember is powering OFF.
PAIR: Displayed when the Ember is in pair mode. The Ember must be in pair mode to pair to the App initially. To enter to pairing mode, press and hold the touch logo for 7-10 seconds until "PAIR" appears on the display.
UPDATING: Displayed when the Ember is processing a firmware update through the Ember mobile application.
ERROR: If the Ember displays "ERROR", a processing error has occurred. Please reach out to us if this happens.
RESET: When the reset button (accessed via the pinhole on the bottom of the mug) is pressed and held for 10 seconds, this will be displayed as all stored data and paired devices are removed from the mugs memory.